The bead being laid: 0.45 mm wide, 0.3 mm tallThe cup: 3 solid layers with ±45° infill, then 130 layers of two wallsFilament: 1.75 mm, pulled from the spool by the extruderThe extruder pushes 1.75 mm filament into a nozzle held at about 210 °C, which lays a 0.45 mm bead. The nozzle moves in X, the heated bed moves in Y under it, and after each layer the lead screws lift the gantry 0.3 mm. This cup takes 133 layers, 27 minutes and 3.8 m of filament; ×1 is real time.